Hello,
I have a Cisco 2851 that I need to set up with 3 VLANs and a DMZ for an external public server. The internal clients also need access to the server. This is my first 2851 config, so please bear with me (I have configured many 800 series routers though).
My thoughts would be to physically connect the ISP to the gi0/0 port on the router. I have installed a HWIC-4ESW so that I can connect the Netgear Layer 2 switch to one fa port and the server to the other fa port. Does this seem right?
Please see the attached diagram.
