Router on a stick not pinging from vtp client hosts ?

[jordan-jj]

Hello 

I got below scenario but my host in vlan 200 not pinging to my default gateway 

While I removed vtp transparent switch the host can ping the gateway

How to make vlan routing works in the above scenario ?

[Jon Marshall]

On the VTP transparent switch did you create the vlan in the vlan database ?

Jon

[jordan-jj]

Yes...

manual Vlan 200 

[jordan-jj]

Yes...

manual Vlan 200

[jordan-jj]

yes .. 

vlan 200 manual entered 

[chrihussey]

Just out of curiosity, if you change switch 1 from client to transparent (and create VLAN 200), can the host then ping the gateway?

Thanks

[Georg Pauwen]

Hello,

so on the transparent switch you created the VLAN:

Switch1#conf t

Switch1(config)#vlan 200

Switch1(config)#end

And the trunk interfaces look like below:

Switch#sh interfaces trunk

Port Mode Encapsulation Status Native vlan
Gi0/0 on 802.1q trunking 1
Gi0/1 on 802.1q trunking 1

Port Vlans allowed on trunk
Gi0/0 1-4094
Gi0/1 1-4094

Port Vlans allowed and active in management domain
Gi0/0 1,200
Gi0/1 1,200

Port Vlans in spanning tree forwarding state and not pruned
Gi0/0 1,200
Gi0/1 1,200