Router priority in OSPF

[thangaRasu]

In OSPF each interface will have a priority or Common priority value for all the interfaces

[acampbell]

Hi,

The OSPF priority is used to decide which router will be elected the DR.

Have a look at this link to the "ip ospf priority" command, I think this is a good

description

http://www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfospf.html#wp1018469

Regards,
Alex.
Please rate useful posts.

[thangaRasu]

In the above mentioned link i saw for a single interface what about remaining interfaces if it has

[acampbell]

Hi,

The default prority is 1

Regards,
Alex.
Please rate useful posts.