05-26-2009 09:34 AM - edited 03-06-2019 05:56 AM
According to the attachment, I am running OSPF between CE2 and PE2 and the rest of the switches bgp. mpls LDP enable between PE's. The routes in the VRF's on CE2 (VRF1/VRF2) i need to advertise in to the global routing table on PE2 so i can get those routes advertise in to BGP on PE2 so that PE1 and CE1 can see those routes. I don't want to enable trunking between CE2/PE2 to accomplish that or use route leaking.
Is there another way to get the vrf's routes on CE2 to PE2 BGP routing? Please note that PE2 is not aware of the VRF's..
05-26-2009 12:25 PM
Hi,
You can loop interfaces using a cross over cable on the same router and put them in different vrfs/global routing table.At PE2 redistribute OSPF into BGP
HTH,
Rakesh
05-26-2009 01:20 PM
Rakesh,
thanks for your comment. can you please provide more info.
thanks
francico
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide