Hope someone can clear up this question for me:
We have:
2 Nexus 5548
2 6509
The core is the 6509, the two nexus switches will route for vlan 10,20,30 using eigrp. The current setup is
-The core does not have the svi for the above vlan but is learning the routes through eigrp
-The Nexus have the svi for the above vlans.
May question is that the vlans have the command "ip passive-interface eigrp 100". Shouldn't this command stop sending hellos and stop sending routing updates?.
I have routes on both devices.
Thanks for any help.