02-02-2023 03:15 PM
I have a this switch and I'm trying to setup a very simple routing command to send all traffic to the next hop. The basic configuration I have done is:
From the switch I can ping 8.8.8.8 just fine
From a PC connected I can ping
But can't ping
Running tracert from the PC I can see it reach 172.16.104.1 as the first hop but after that everything else fails.
I don't have access to the 192.168.11.1 device (corporate rules). I do not have any routing protocols or NAT setup. I feel like I'm missing on simple thing but not sure what it is.
John
02-02-2023 03:27 PM - edited 02-02-2023 03:33 PM
Hi,
Since you are using a different subnet for the lan side of the switch (172.16.104.0/24), the HQ router needs to have a static route for that subnet
ip route 172.16.104.0.0 255.255.255.0 192.168.11.104
HTH
02-02-2023 03:54 PM - edited 02-02-2023 03:55 PM
02-02-2023 04:06 PM
Yeah, you may have to just extend the same addressing scheme (192.168.11.0/24) to the switch, make the switch just layer-2 and make the connection to the router a switch port.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide