Solved: Routing over VPC Link ?

Rajagopal Sivaramakrishnan · ‎08-10-2015

I know, this has always been an issue , especially in N7K ? but is there any development to this ? I heard from someone that Cisco has solved this with the new 7.x version ? Has anyone tested this recently ?

http://adamraffe.com/2013/03/08/l3-over-vpc-nexus-7000-vs-5000/

Please help

Raj

Steve Fuller · ‎08-11-2015

Hi Reza,

The problem is presumably that of creating routing adjacencies in the presence of Cisco vPC. There was a link to the post L3 over vPC: Nexus 7000 vs 5000 on Adam Raffe's blog that describes.

Hi Raj,

Take a look at Dynamic Routing over vPC possible in 7.2 NX-OS? that was created in the WAN, Routing and Switching forum and see if that answers your question.

Regards

View solution in original post

Reza Sharifi · ‎08-10-2015

What is the issue?

Can you explain the problem?

Steve Fuller · ‎08-11-2015

Hi Reza,

The problem is presumably that of creating routing adjacencies in the presence of Cisco vPC. There was a link to the post L3 over vPC: Nexus 7000 vs 5000 on Adam Raffe's blog that describes.

Hi Raj,

Take a look at Dynamic Routing over vPC possible in 7.2 NX-OS? that was created in the WAN, Routing and Switching forum and see if that answers your question.

Regards

Rajagopal Sivaramakrishnan · ‎08-11-2015

Steve

Awesome info. thanks so much