05-24-2013 12:45 PM - edited 03-07-2019 01:32 PM
Hi Everyone,
R2 is EIGRP nei to R3
R2 config
ip route 10.1.1.0 255.255.255.255 10.1.23.3
ip route 10.1.1.1 255.255.255.255 10.1.23.3
ip route 10.1.1.2 255.255.255.255 10.1.23.3
ip route 10.1.1.3 255.255.255.255 10.1.23.3
R2#sh ip eigrp topology 10.1.1.0/32
EIGRP-IPv4:(123) (AS 123): Topology Default-IP-Routing-Table(0) entry for 10.1.1
.0/32
State is Passive, Query origin flag is 1, 1 Successor(s), FD is 28160
Descriptor Blocks:
10.1.23.3, from Rstatic, Send flag is 0x0
Composite metric is (28160/0), Route is External
Vector metric:
Minimum bandwidth is 100000 Kbit
Total delay is 100 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 0
External data:
Originating router is 10.1.23.2 (this system)
AS number of route is 0
External protocol is Static, external metric is 0
Administrator tag is 0 (0x00000000)
Need to know what R in Rstatic static mean?
Does R stand for Route?
Thanks
Mahesh
Solved! Go to Solution.
05-24-2013 01:17 PM
Hi Mahesh,
R stands for redistributed.
Regards
05-24-2013 01:19 PM
Hi Mahesh,
Correct that is for static route that is redistributed to EIGRP
This is a route that was redistributed to EIGRP
3750-Switch#sh ip eigrp topology 10.10.10.0 255.255.255.0
EIGRP-IPv4 Topology Entry for AS(65010)/ID(2.2.2.1) for 10.10.10.0/24
State is Passive, Query origin flag is 1, 1 Successor(s), FD is 28160
Descriptor Blocks:
192.168.20.2, from Rstatic, Send flag is 0x0
Composite metric is (28160/0), route is External
Vector metric:
Minimum bandwidth is 100000 Kbit
Total delay is 100 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 0
Originating router is 2.2.2.1
External data:
AS number of route is 0
External protocol is Static, external metric is 0
This is a route that was advertised by network command
3750-Switch#sh ip eigrp topology 172.16.0.0/16
EIGRP-IPv4 Topology Entry for AS(65010)/ID(2.2.2.1) for 172.16.0.0/16
State is Passive, Query origin flag is 1, 1 Successor(s), FD is 156160
Descriptor Blocks:
192.168.20.2 (GigabitEthernet1/0/23), from 192.168.20.2, Send flag is 0x0
Composite metric is (156160/128256), route is Internal
Vector metric:
Minimum bandwidth is 100000 Kbit
Total delay is 5100 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 1
HTH
Reza
05-24-2013 01:17 PM
Hi Mahesh,
R stands for redistributed.
Regards
05-24-2013 01:19 PM
Hi Mahesh,
Correct that is for static route that is redistributed to EIGRP
This is a route that was redistributed to EIGRP
3750-Switch#sh ip eigrp topology 10.10.10.0 255.255.255.0
EIGRP-IPv4 Topology Entry for AS(65010)/ID(2.2.2.1) for 10.10.10.0/24
State is Passive, Query origin flag is 1, 1 Successor(s), FD is 28160
Descriptor Blocks:
192.168.20.2, from Rstatic, Send flag is 0x0
Composite metric is (28160/0), route is External
Vector metric:
Minimum bandwidth is 100000 Kbit
Total delay is 100 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 0
Originating router is 2.2.2.1
External data:
AS number of route is 0
External protocol is Static, external metric is 0
This is a route that was advertised by network command
3750-Switch#sh ip eigrp topology 172.16.0.0/16
EIGRP-IPv4 Topology Entry for AS(65010)/ID(2.2.2.1) for 172.16.0.0/16
State is Passive, Query origin flag is 1, 1 Successor(s), FD is 156160
Descriptor Blocks:
192.168.20.2 (GigabitEthernet1/0/23), from 192.168.20.2, Send flag is 0x0
Composite metric is (156160/128256), route is Internal
Vector metric:
Minimum bandwidth is 100000 Kbit
Total delay is 5100 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 1
HTH
Reza
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide