05-31-2017 08:53 AM - edited 03-08-2019 10:48 AM
I have a RV320 running firmware version v1.2.1.14. The router is configured to run in gateway mode using DHCP for the WAN address. _ get the IP address from Comcast. Everything is working fine, but I'd like to get the DHCP lease information. Problem is I cannot find anything in the admin pages where that information is displayed. Is there a way to get this data?
05-31-2017 09:13 AM
Most likely the lease is set not to expire, but you would need to contact Comcast to get the DHCP lease info.
HTH
05-31-2017 09:23 AM
Other Cisco routers display the WAN DHCP lease information on the system summary page. This should be the case for the RV320 too. Presenting this information in the admin UI is always the case case for every router & firewall I've used before.
I can easily get the lease information by connecting a laptop to the cable modem and displaying the ip configuration. I don't want to do that because it is a PITA.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide