We had a power failure and the primary IP address went down moved to the standby router as designed using HSRP. The problem is when a secondary address was added to the VLAN.. there was no HSRP programmed for it. So we have one router doing the primary and another doing the secondary.
We need to get everything on the 6509 router. The 3750 stack/router is going to be remove in the near future anyway.
We need to do this with little or no interuption because this is our server network. Devices on both 192.168.23.x and 10.23.x.x are all working now.
Thanks as always !!!!
Here are the configs:
EMI 3750:
interface Vlan23
description Primary Vlan 23 Router
ip address 10.23.0.1 255.255.0.0 secondary
ip address 192.168.23.244 255.255.255.0
ip helper-address 192.168.23.2
ip helper-address 192.168.23.82
ip helper-address 192.168.23.77
standby 23 ip 192.168.23.1
standby 23 priority 105
end
sho standby br
Interface Grp Prio P State Active Standby Virtual IP
Vl23 23 105 Standby 192.168.23.252 local 192.168.23.1
6509 ( needs to made primary)
interface Vlan23
description backup Vlan 23 Router
ip address 192.168.23.252 255.255.255.0
ip helper-address 192.168.23.82
ip helper-address 192.168.23.77
no ip redirects
ip flow ingress
standby 23 ip 192.168.23.1
standby 23 priority 95
end
sho standby br | in 23
Interface Grp Prio P State Active Standby Virtual IP
Vl23 23 95 Active local 192.168.23.244 192.168.23.1