cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
328
Views
0
Helpful
1
Replies

server polices empty and not able to enable ip device-tracking

samrckz17
Level 1
Level 1

server polices empty and not able to enable ip device-tracking in cat9k switch
Interface: GigabitEthernet1/0/17
IIF-ID: 0x172B3016
MAC Address: 8cae.4cfe.0194
IPv6 Address: Unknown
IPv4 Address: Unknown
User-Name: it1
Status: Authorized
Domain: DATA
Oper host mode: multi-auth
Oper control dir: both
Session timeout: N/A
Acct update timeout: 300s (local), Remaining: 241s
Common Session ID: AB65650A0000003D232C872D
Acct Session ID: 0x00000083
Handle: 0x32000033
Current Policy: POLICY_Gi1/0/17


Local Policies:
Service Template: DEFAULT_LINKSEC_POLICY_SHOULD_SECURE (priority 150)
Security Policy: Should Secure

Server Policies:


Method status list:
Method State
dot1x Authc Success

1 Reply 1

Hello,

 Remove the authentication from the interface and connect the device. Does it gets IP address?