Hi,
I trying to set up inter VLAN on the Cisco 2651XM router. I try to type the IP address on the sub interface but it gives me an error. I need to set up first
the encapsulation dot1 q. I type encapsulation command but it doesn't recognized.
This is the version of my router
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.2(8)T5, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 21-Jun-02 08:50 by ccai
Image text-base: 0x80008074, data-base: 0x80A2BD40
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
Router uptime is 32 minutes
System returned to ROM by power-on
System image file is "flash:c2600-i-mz.122-8.T5.bin"
cisco 2651XM (MPC860P) processor (revision 0x100) with 125952K/5120K bytes of memory.
Processor board ID JAD07130B30 (708131756)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2142
Do I need to update my cisco IOS if I do what os version I need and how can i download the cisco IOS.
