cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1818
Views
0
Helpful
1
Replies

Setting up DMZ on EPC3208G cable modem with access from inside and outside

cmonty_burns
Level 1
Level 1

Hello!

 

My cable internet provider offered the cable gateway EPC3208G for internet access.

In addition I want to continue using my router "AVM FRITZ!Box 7390".

 

The cable gateway offers a function DMZ, which I would like to use for a webservice.

 

This results in the following network layout:

Client 1 -------                                                                  inside                                              outside     Client 4

Client 2 -------     Router (192.168.0.10)  -----------   Switch   -----------    EPC3208G (192.168.0.1)    -----------     Client 5

Client 3 -------               internal IP                           |                        internal IP                        public IP    Client <n>

                          192.168.178.x/24                        |                    192.168.0.x/24   

                                                                           |                                            

                                                                        DMZ

                                                                    Webservice (192.168.0.11)

 

What must the configuration of EPC3208G look like in order to have access to the webservice running in DMZ from both inside clients (LAN) and outside clients (WAN)?

 

THX

1 Reply 1

rosaho
Level 3
Level 3

This discussion has been reposted to the CSC Content with No Valid Community to Post community.