Hi Guys,
I am trying to configure my lab with Vlans and access to the internet VIA my Virgin Media router. I have had this working but while messing around i have broken it. Can anyone give me a hint as to how? Below is my router configuration. My laptop is connected to a switch and is pulling 192.168.10.1/24 via DHCP Thanks
Current configuration : 1681 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname CBTRouter
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$XtrM$gDxcY6FRQ3LQWGfY./E4K.
!
no aaa new-model
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.0.50
ip dhcp excluded-address 192.168.10.50
!
ip dhcp pool dpool1
import all
network 192.168.10.0 255.255.255.0
default-router 192.168.10.50
!
!
no ip domain lookup
ip domain name CBTRouter.com
ip name-server 8.8.8.8
ip name-server 8.8.4.4
interface FastEthernet0/0
no ip address
ip virtual-reassembly
duplex auto
speed auto
!
interface FastEthernet0/0.10
description VLAN10 LEFT
encapsulation dot1Q 10
ip address 192.168.10.50 255.255.255.0
ip nat inside
ip virtual-reassembly
!
interface FastEthernet0/0.20
description VLAN21 RIGHT
encapsulation dot1Q 20
ip address 192.168.20.50 255.255.255.0
!
interface Serial0/0
no ip address
shutdown
!
interface FastEthernet0/1
ip address dhcp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
!
ip route 192.168.10.0 255.255.255.0 FastEthernet0/1
!
!
no ip http server
no ip http secure-server
ip nat pool no-overload 192.168.0.100 192.168.0.150 prefix-length 24
ip nat inside source list 7 pool no-overload
!
access-list 7 permit 192.168.10.0 0.0.0.255
!
!
control-plane
!
!
banner motd ^CC
My router. Keep out.^C
!
line con 0
exec-timeout 0 0
password cisco
logging synchronous
login
line aux 0
line vty 0 4
password cisco
login
!
!
end
