SFP Compatibility betwen SMB and Catalyst Switch

[Adan Correa]

Hi

I'm creating a network design, I need to confirm wich SFP i can use to interconnect  a SG350-28SFP with MGBLH1 transceivers to a switch Catalyst 3850-XS. 

The objective to fulfill is that the fiber link betwen both switches supports up to 40km. 

[acampbell]

Hi,

To support up to 40KM on the 3850-XS you will need a GLC-EX-SMD SFP.

More info can be seen here:-

https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/gigabit-ethernet-gbic-sfp-modules/product_data_sheet0900aecd8033f885.html

[Adan Correa]

Hi acampel, 

thank you for your answer, but i have a doubt if GLC-EX-SMD is compatible with the SFP for SMB MGBLH1.

Where i can validate it? 

I have this documentation, but it does not indicate compatibility between GLC-EX-SMD and MGBLH1

https://community.cisco.com/t5/small-business-support-documents/interconnect-cisco-sb-switch-and-catalyst-switch-with-sfp/ta-p/3146234

[khiemphampr]

Hi Acampbell,

I can use GLC-LH-SMD SFP for SG350-28SFP Switch ?

[acampbell]

Hi,

Yes - this SFP is compatible the SG350 range

350 Series

SG350

GLC-LH-SMD

1 Gbps

SFP

550m

Duplex Fiber

MMF

LC

Optic

-5 to 85C

Y

2.3.5.63

GLC-LH-SMD

1 Gbps

SFP

10km

Duplex Fiber

SMF

LC

Optic

-5 to 85C

Y

2.3.5.63

[khiemphampr]

Hi acampbell,

I see 2 Copper ethernet port on SG350-28SFP-K9-EU switch. They are port 10/100/1000 type ?

[mohammedshahidali88]

Refer below link to check the compatibility of the modules.

https://tmgmatrix.cisco.com/