Hi all!
I've working with an ASR1001 and connecting different transceivers to it, I have some SFP-GE-T with Part Number: 30-1421-03 and they not working! I have the same model SFP with different part number too (30-1421-02) and it works perfectly.
Is there any compatibility problem with this part number: 30-1421-03 ?
The only difference I can see is:
router#sh hw-module subslot 0/0 transceiver 0 idprom
IDPROM for transceiver GigabitEthernet0/0/1:
Description = SFP or SFP+ optics (type 3)
Transceiver Type: = GE T (26)
Product Identifier (PID) = N/A
Vendor Revision = V03
Serial Number (SN) = MTC1603002Q
Vendor Name = CISCO-METHODE
Vendor OUI (IEEE company ID) = 00.00.00 (0)
CLEI code =
Cisco part number =
Device State = Enabled.
Date code (yy/mm/dd) = 20/14/05
Connector type = Unknown.
Encoding = 8B10B
NRZ
Nominal bitrate = GE (1300 Mbits/s)
Minimum bit rate as % of nominal bit rate = not specified
Maximum bit rate as % of nominal bit rate = not specified
router#sh hw-module subslot 0/0 transceiver 1 idprom
IDPROM for transceiver GigabitEthernet0/0/1:
Description = SFP or SFP+ optics (type 3)
Transceiver Type: = GE T (26)
Product Identifier (PID) = N/A
Vendor Revision =
Serial Number (SN) = MTC184708UA
Vendor Name = CISCO-METHODE
Vendor OUI (IEEE company ID) = 00.00.00 (0)
CLEI code = IPUIAPARAB <--------
Cisco part number = 30-1421-02 <-------- 30-1421-02 have this info and the other model not
Device State = Enabled.
Date code (yy/mm/dd) = 14/11/24
Connector type = Unknown.
Encoding = 8B10B
NRZ
Nominal bitrate = GE (1300 Mbits/s)
Minimum bit rate as % of nominal bit rate = not specified
Maximum bit rate as % of nominal bit rate = not specified
Please help, what can I do to make 30-1421-03 work??? I bought 10 and none works.
Thanks so much
Regards!
