SFP-H10GB-CU5M cable to connect SUP7L-E to C3KX-NM-10G= on 3750X

[lefernandez]

Hi everyone

I would like to know if it is supported connecting the SUP7L-E 10GE ports to a C3KX-NM-10G, using a SFP-H10GB-CU5M (or shorter).

Thanks in advance

Luis Eloy

Sent from Cisco Technical Support iPad App

[Ivan Shirshin · Accepted solution]

Hi,

As I understand, you have 3750 with C3KX-NM-10G module in it that you want to connect to 4500 with sup7L-E. This NM module has four physical ports with two SFP+ and two regular SFP ports.

The following SFP+options work for both from sup7L-E and C3KX-NM-10G:

     SFP-H10GB-CU1M= 1-m 10G SFP+ Twinax cable assembly, passive

     SFP-H10GB-CU3M= 3-m 10G SFP+ Twinax cable assembly, passive

     SFP-H10GB-CU5M= 5-m 10G SFP+ Twinax cable assembly, passive

See the SFP compatibility list here:

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6974.pdf

Note that you need SFP+ version 2 and that there are minimum SW requirements as well.

Kind Regards,
Ivan Shirshin

**Please grade this post if you find it useful.

[lefernandez]

thanks for the answer

I have accidentally rated your answer too low (not used to the iPad interface)

sorry for that

Sent from Cisco Technical Support iPad App

[Ivan Shirshin]

It's ok :-) welcome!