SFP power problem

[Amr Hafez]

Hi All

I configured  Cat 4507 with 2 sup and 2 48 port UTP modules

the sup module nclude for SFP ports 2-10G and 2-1G

I inserted 2- compatible SFP in the 2-10G port of both SUP but only one SFP from each SUP can operate and the other SFP returned an eeror that the SUP can not support the SFP with power ?

could i fix that ??

[Reza Sharifi]

Hi,

What is part number for the sup?

[Amr Hafez · Accepted solution]

WS-X45-SUP7L-E

non blocking for both 10 G and 1 G

and IOS is Cisco IOS^® XE Software, the modular open application platform for virtualized borderless services with the full feature set of Cisco IOS Software Release 15.0SG

also we use

SFP-10G-SR

[Reza Sharifi]

When you have 2 sups in the chassis, you can only use one of the 10Gig ports in each sup.

have a look at table-2 in this link:

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/data_sheet_c78-686325.html

HTH

[Amr Hafez]

so, o any solution for this problem 

I have 4 10Gbps uplinks must work with all BW 40 Gbps

shall I need to buy anothe 10G module ? or any upgrade or update can be used?

[InayathUlla Sharieff]

    High-Availability and Uplink Options for Supervisor Engine 7L-E in Dual Supervisor Engine Mode

2-

Yes you need to bug another module (line card) which support 10Gp.

HTH