08-08-2017 09:43 AM - edited 03-08-2019 11:39 AM
Hi,
Trying to use an SFP port on a 2960 for a LAN machine as they need a 1GB connection but it does not seem to be working. The port has been configured for the vlan and is enabled but doesn't seem to like it.
Are you able to use these ports for clients and if so do they have to be of a certain vendor to negotiate speed?
Thanks
Sonny
08-08-2017 10:18 AM
Hard-code the speed and duplex. Negotiation has it's quirks.
08-08-2017 10:30 AM
Hi,
I have not used it for a client but you should consider 2 things:
- Modify the speed to 1000 under the port and Duplex Full
- Verify if the NIC of the computer supports 1000Mb or it is working at 100Mb.
08-08-2017 03:43 PM
Cable could be faulty. Run a TDR test.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide