07-04-2024 05:12 AM
Hey guys
im trying to configure the sftp on a cisco c1000
i followed the documentation
however when I execute the wr it shows no erros, in switch logs shows nothing
everything is OK with username a password for the sftp user
everything is enabled
firewall is allowing all traffic
from the switch i can ping the destination
what im a I missing
thank you for your help
07-04-2024 05:28 AM
- Use this documentation as a reference : https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-10/configuration_guide/sec/b_1610_sec_9300_cg/configuring_ssh_file_transfer_protocol.html#task_s31_gwz_3fb
and or tryout the mentioned examples too ,
M.
07-05-2024 08:59 AM
i used the cisco 1000 documentation but its the same command and does not work
07-05-2024 09:15 AM
- Post screenshot(s) of commands tried and the output ,
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide