06-20-2022 05:30 AM - edited 06-20-2022 05:31 AM
Hi, I'm a beginner using cisco switch for vlans.
I've configured GE24 as trunk, vlan 1, 10 and 20
GE1 access vlan 10
GE2 access vlan 20
when I pull out and reinsert network cables, these two access GEs turn to trunk with 1, 10 and 20 .
can I prevent this?
thanks
Solved! Go to Solution.
06-20-2022 05:44 AM
Hi,
try to disable SmartPort.
Disable SmartPort (it's enabled by default)
In Console
in global config mode - "no macro auto"
or per interface "no macro auto smartport"
06-20-2022 05:44 AM
Hi,
try to disable SmartPort.
Disable SmartPort (it's enabled by default)
In Console
in global config mode - "no macro auto"
or per interface "no macro auto smartport"
06-22-2022 04:25 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide