SG350 XG Ring Topology Configuration

[esprit1987]

Hi,

Just after some advise on how best to configure the attached ring network for best performance. I have added some notes regarding uplinks between switches from research done so far, but some further guidance on how to get this off the ground will be much appreciated.

[Amrein]

Hello,

We configured a stack of 6 Cisco SG500 52P switches in a ring topology. And then wanted to expand the stackport into one more floor with a Cisco SG350x 24P. So eventually, we decided to designate one of the SFP ports as a trunk. Then we recreated the VLAN/voice/misc configuration and connected the switches together.

A helpful link:
Chain and Ring Topologies on the SG350XG and SG550XG switches:

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-350x-series-stackable-managed-switches/smb5237-chain-and-ring-topologies-on-the-sg550xg-and-sg350xg-switche.html

Patrick Amrein

Access rated page customwritingcompany.com