SGE2010P VOIP QOS IP Based ACL

[timjeens1]

Hi Guys,

Slowly trying to figure out how to set up QOS on this switch.

But not really sure how to set up the IP Based ACL for VOIP traffic.

I have given it a Name (VOIP), with a priority of 1.

There is a big list of Protocols now to select from, but I do not know which to select..

ICMP, IGMP, IP, TCP, EGP, IGP, UDP, HMP, RDP, IDRP, IPv6, IPv6:Route, IPv6:Frag, IDRP, RSVP, and AH

Can anyone help set up this page (attached)

Or at least let me know which protocol to select.

Thanks,

-Tim

[cadet alain]

Hi,

Voice data use RTP+UDP and voice signaling can be SCCP( TCP) or SIP(TCP).

Regards.

Alain.

[timjeens1]

Hi Alain,

Thanks for the reply, RTP isn't in the list but UDP is, is there a specific port, or would any do?  also for the SIP(TCP)?

and whats the difference between Voice Data and Coice Signalling?

Thanks,

-Tim