I want to enable short LACP timeouts on a Cisco Catalyst 3560G running IOS 12.2(50)SE1.
Does Cisco support short LACP timeouts on this switch? I cannot find the right command to do so.
My current config is:
interface GigabitEthernet0/5
lacp port-priority 600
channel-protocol lacp
channel-group 1 mode active
spanning-tree portfast
!
interface GigabitEthernet0/6
lacp port-priority 700
channel-protocol lacp
channel-group 1 mode active
!
interface Port-channel1
spanning-tree portfast
!
lacp system-priority 1200
Any help will be appreciated. Thanks.