The "common-functions" widget cannot be found.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

show controllers ethernet-controller output

steve.kirk
Community Member

‎01-23-2009 04:55 AM - edited ‎03-06-2019 03:36 AM

Hi,

I'm getting the following included in the output of a 'show controllers ethernet-controller gi0/1' command:

24232 0 Addr Cmp frames

10392864 1 Addr Cmp frames

23787137 2 Addr Cmp frames

It's a trunk port connected to a WS-C3524-XL, but I can't find in anywhere in the documentation on Cisco.com that actually explains what these counters are. Can anyone enlighten me?

Cheers,

Steve

Labels:
0 Helpful
2 Replies 2

crow930us
Level 6
Level 6

‎01-24-2009 12:54 AM

CMP refers to the Cluster Management Protocol. Looks like you have configured clusting on this device. This document might help: http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a00801347f8.shtml

steve.kirk
Community Member
In response to crow930us

‎01-26-2009 12:13 AM

Thanks for your response - unfortunately I inherited this set up from elsewhere. The link looks useful though.

Am I right in thinking that Cisco does not recommend using Clustering these days?

Cheers,

Steve

0 Helpful