show environment power status description 3850

[Farrache Gilles]

Hello,

I have the following output on a Cisco 3850 running cat3k_caa-universalk9.SPA.03.03.05.SE.150-1.EZ5.bin for the show environment power:

b2ksr27-cas01#sh environment power

SW  PID                 Serial#     Status           Sys Pwr  PoE Pwr  Watts

--  ------------------  ----------  ---------------  -------  -------  -----

1A  PWR-C2-640WAC       DCB1843B7XZ  OK              Good     Good     640

1B  PWR-C2-640WAC       DCB1843B7Y1  Sust. Overload  Bad      Bad      640

Can someone tell me what is the meaning of the status on the second line ?

Thanks

[Mark Malone]

anything showing in the logs , have you tried to re-seat it since its hotswap , or swap them around see if the faults follows the psu

some of our 3850s as below show the ps as unknown its a bug but there still good , i cannot see anything in your release for a caveat regarding overload

1B  PWR-C1-350WAC       xxxxxxxxx  No Response     Good     Good     350

[Madhukrishnan Gopinathan Nair]

-- Please perform a reseat of the PS, i believe that will fix it.