Hi people,
I want to know how to interpret properly this command?
What am I supposed to determine from this command?
Regional1 Con0 is now available
Press RETURN to get started!
Regional1>enable
Regional1#show ip eigrp topology
IP-EIGRP Topology Table for AS(222)/ID(192.168.80.33)
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - reply Status, s - sia Status
P 192.168.95.0/24, 1 successors, FD is 2172416
via 192.168.77.34 (2172416/28160), FastEthernet0/0
P 192.168.80.0/24, 1 successors, FD is 2172416
via Connected, Serial0/1
P 192.0.18.0/24, 1 successors, FD is 2172416
via Connected, FastEthernet0/1
P 192.168.77.0/24, 1 successors, FD is 2172416
via Connected, FastEthernet0/0
P 192.168.90.0/24, 1 successors, FD is 2172416
via 192.168.80.34 (2172416/28160), Serial0/1
P 192.168.70.0/24, 1 successors, FD is 2172416
via 192.168.36.14 (2172416/28160), Serial0/0
P 192.168.36.0/24, 1 successors, FD is 2172416
via Connected, Serial0/0
Regional1#
