On the nexus 7K, when the command show ip ospf database summary area x.x.x.x is run, it is only showing the default route with the lowest cost. The default route cost is configured specifically with two different cost value (cost 2 and 9). Have the same setup with the 6500 but seeing both info from the show ip ospf database but not on the 7K. Is this behaviour inherent to NExus 7? or something else....
akldcb-agg-2# sh ip ospf database summary area 0.0.0.x
OSPF Router with ID (x.x.x.x) (Process ID 1 VRF default)
Summary Network Link States (Area 0.0.0.3)
Link ID ADV Router Age Seq# Checksum
0.0.0.0
x.x.x.y 332 0x80000373 0x0c99
akldcb-agg-2# sh ip ospf database summary area 0.0.0.x
OSPF Router with ID (x.x.x.x) (Process ID 1 VRF default)
Summary Network Link States (Area 0.0.0.3)
Link ID ADV Router Age Seq# Checksum
0.0.0.0 x.x.x.y 332 0x80000373 0x0c99
