cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3364
Views
0
Helpful
4
Replies

show platform software status control-processor brief

zarjer
Level 1
Level 1

Is it normal on the ISR 4351 with this free memory using the show platform software status control-processor brief command? No initial configuration on the device and also out-of-the-box.

 

viber image.jpg

4 Replies 4

Hello

Looks like there is some configuration on as the hostname has been changed?

Suggest wr erase the rtr and reload the box, Also check the flash and see if there are any unnecessary files that could be removed.

 

Lastly check the ios version for any identified known bugs to it.


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

Even if this has been configured with a hostname , the free memory does show 1% at all? The router is not yet on production. 

Hi Sir paul, my question is what command do we issue if we are to see the memory utilization of the router?

Hello

What you said was the rtr was out of the box hence my statement about it has a hostname, meaning it must have had to changes made to it, hence the suggestion to wipe it.

sh processes memory sorted - will show you the memory utilization of the rtr


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco