show spantree command!!!

[nikhil.gupta]

i wanna to know the output of "show spantree command" in a Network which have 3 switches and 3 VLANs ...and each individual switch

is a Root Bridge of each different VLAN...lets say Switch A is a Root bridge for VLAN1 Switch B is root bridge for vlan 2 and so on..onething more all three the switches r connected in triangle shape.

plz plz plz paste the output of show spantree...im aware of everything of STP..so dont teach me anything abt STP..as i dont have devices with me..i just wannato check whether wut im thinking is going to be correct or not!!!

[b.hsu]

To know the status of each vlan use the command show spantree .With this command we could know status of each vlan. For Sample output refer the following URL

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_6_1/cmd_ref/sh_sp_te.htm#12352