Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I am facing awird problem. I have a customer who has a LAN in Korea and a LAN in Leeds, UK. He is unable to ping between the LANs across a MPLS network.I can ping from PE in Korea to LAN in Leeds and from PE in Leeds to LAN in Korea.However, when ...
i wanna to know the output of "show spantree command" in a Network which have 3 switches and 3 VLANs ...and each individual switch is a Root Bridge of each different VLAN...lets say Switch A is a Root bridge for VLAN1 Switch B is root bridge for vlan...
Hi,I am running MPLS VPN. Yes, the ping with the record route and without the record route is with the same source and destination adress.I am still not sure as when the PE can ping across why cant the Directly connected Ce ping?Thanks in advance,-ni...
Hi Carl,There is not much of a fucntionla difference between IPT and VOIP. In vOIP the call control decisions are taken by the gateway or the gaetkeeper whereas in IPT the call control decisions are taken care the Call manager which is basically a ce...
hey olisee if this helps:http://www.cisco.com/en/US/products/hw/routers/ps380/products_configuration_guide_chapter09186a0080118cbb.html#wp1071820rgds,nikhil
Hi,Anothet thing that you can do if you do not want to manipulate the cost is to use the bandwidth on the interfaces . Make sure you configure the same bandwidth on all the intercaes hence same cost so OSPF will perorm load balancing.thanksnikhil Gup...
