cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2509
Views
5
Helpful
33
Replies

Slow Browsing

sajin9231
Level 1
Level 1

Hi

I use a C3750 as my core switch where I have configured all the vlans for my office. We have a 100 Mbps link for Internet but I notice that the speed is only nearly half from user side. The 100 Mbps link is connected to a firewall to which the switch is connected. In order to make sure this is not an ISP issue, I connected a laptop directly to the firewall and got a speed more than 90 Mbps. So it's definitely not an ISP issue. Attached is the configuration of my switch. I'm not able to find out where the configuration is wrong. Any assistance would be appreciated.

33 Replies 33

Hello,

 

I wonder if your switch CPU and/or memory are maxed out. Can you post the output of:

 

sh processes cpu sorted | exclude 0.00

sh processes memory sorted

Hrllo

can you also post

sh switch detail

sh switch stack-ring speed

 

Have you tried:

changing to another port

swapping cabling 

hardcoding speed:duplex settings 


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

Hi Paul,

Please find the details you require.

Switch/Stack Mac Address : fc5b.3959.6e80
                                           H/W   Current
Switch#  Role   Mac Address     Priority Version  State
----------------------------------------------------------
*1       Master fc5b.3959.6e80     15     3       Ready
 2       Member bc16.f5c4.ea00     14     3       Ready



         Stack Port Status             Neighbors
Switch#  Port 1     Port 2           Port 1   Port 2
--------------------------------------------------------
  1        Ok         Ok                2        2
  2        Ok         Ok                1        1
OMAHO_LAN_CORESW1#sh switch stack-ring speed

Stack Ring Speed        : 32G
Stack Ring Configuration: Full
Stack Ring Protocol     : StackWisePlus

I will try the steps you mentioned.

 

 

Hi Georg,

Please find the details you asked. Attached is the output of memory.

OMAHO_LAN_CORESW1#sh processes cpu sorted | exclude 0.00
CPU utilization for five seconds: 12%/0%; one minute: 16%; five minutes: 16%
 PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
  88     6804010     1481269       4593  4.32%  4.64%  4.40%   0 RedEarth Tx Mana
  87     3103948     2153683       1441  1.91%  1.80%  1.78%   0 RedEarth I2C dri
  58      115235        2785      41377  0.79%  0.09%  0.06%   0 Per-minute Jobs
 205      283037       32915       8599  0.15%  0.16%  0.15%   0 HQM Stack Proces
 241      350080     1055296        331  0.15%  0.25%  0.27%   0 IP Input
 206      240899      131382       1833  0.15%  0.13%  0.15%   0 HRPC qos request

 

Review Cisco Networking for a $25 gift card