cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
654
Views
0
Helpful
4
Replies

slow network

dsolangon
Level 1
Level 1

I have a very slow network i have input errors and crc error please see attached filed and see if you have initial findings

L2 Switched: ucast: 30699748 pkt, 2424085658 bytes - mcast: 5488306 pkt, 484304471 bytes
L3 in Switched: ucast: 2467261715 pkt, 174547700256 bytes - mcast: 2 pkt, 165 bytes mcast
L3 out Switched: ucast: 261213161 pkt, 161985629560 bytes

Sent from Cisco Technical Support iPad App

4 Replies 4

acampbell
VIP Alumni
VIP Alumni

Daryl,

Your inteface is claiming 100M Full Duplex and

you are seeing input/crc errors

There is a fair chance that the other end of the link/cable

is not set for 100M/Full duplex and is probably running half duplex

Can you find out what is sett at the other end of the link/cable

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.

Ok i will check ... But have seen any findings on my attached screenshot huge unicast n multicast traffic?

Sent from Cisco Technical Support iPad App


See the attached file

Sent from Cisco Technical Support iPad App

Daryl,

You need to remember that the counts you are seeing are cumulative.

These have been counting up since the last time to cleared the counters on

the interfaces.

You have not cleared the counters on the interface in question since the box

was last reloaded

Last clearing of "show Interface" counters never

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
Review Cisco Networking for a $25 gift card