08-28-2013 06:16 AM - edited 03-07-2019 03:10 PM
Hello everyone!
I have posted a similar topic a few months back without getting any replies so im hoping to get someones input this time
One of our end costumers is trying to poll the Total Power Consumption MIB (OID 1.3.6.1.2.1.105.1.3.1.1.4) using Cisco Works and Cisco NCS from a 2960 switch
The problem is we notice we are getting inaccurate results, when the values differ greatly between what we see in Cisco Works/NCS and in the output of show power inline from the switch. We are polling and issuing the command at the same time and the results are not even close to each other.
Im providing screenshots of the results when issueing SNMP WALK and the output of the command show power inline from two switches showing the same
behavior.
Have anyone encountered such an issue? Any suggestion on something we might be missing?
Thanks in advance.
Daniel.
08-05-2014 05:03 AM
Hey there, did you get a response to this ever? I have the exact same issue
08-06-2014 04:35 AM
I have the same issue. I posted my own question a few months back but never got an answer:
https://supportforums.cisco.com/discussion/12212926/help-snmp-oid-poe-2960s
Bug??
08-07-2014 03:22 AM
I'm not sure it's a bug. I'm monitoring 3750-X's. I guess it could be, but I think it's something to do with the "measured" part of the status. It records this OID as being power used as "measured". If that's the case then it's great because it means it's more accurate and show power inline. Show power inline seems to just add up the allocated power.
It might be the OID is more accurate, it would just be nice to get confirmation of that fact.
08-13-2014 05:45 AM
Last bump. Someone out there must know what this value actually represents!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide