12-18-2012 01:11 AM - edited 03-07-2019 10:40 AM
I have a snmp trap sent every 30 seconds from one of my cisco switches (a stack of 3750 to be precise):
ccStatusMemberStatusChange
Do you know what it is and why it is sent continuously??
Thank you for your answers.
Flo
12-18-2012 03:12 AM
Flo,
If you are receiving this message constantly from your
switch stack you need to investigate further.
Sounds like a switch is not connecting properly
ccStatusMemberStatusChange ccMemberOperStatus = active(1)
Cluster member active, messages received by command switch
Informational
Network Element
None
ccStatusMemberStatusChange ccMemberOperStatus = inactive(2)
Cluster member inactive, messaged failed to be received by command switch
Use the guide at this link link
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_55_se/configuration/guide/swstack.html#wp1284240
Or find the guide for your version of IOS
http://www.cisco.com/en/US/products/hw/switches/ps5023/products_installation_and_configuration_guides_list.html
Regards, Alex. Please rate useful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community