Snmp values and interface values aren't macthing

[johnw230873]

I am after a way of measuring the bps that is flowing through the fast ethernet ports of a cisco switch

I would have expected that using snmp and the mib ifinoctets for the fast ethernet port and would have received the correct value but this is not what I am geting.

What would be the best snmp counter to use to receive RXBS & TXBS values like using show interface fastethernet 0/1 summary

[ankugarg]

Hi John,

Which switch and which ios version?

[johnw230873]

Hi Ankur

cisco WS-C3560V2-24PS

System image file is "flash:/c3560-ipbasek9-mz.122-50.SE1/c3560-ipbasek9-mz.122-50.SE1.bin"

the full mib I'm using is .1.3.6.1.2.1.2.2.1.10.10001

If I do a sh snmp mib ifmib ifindex I see FastEthernet0/1: Ifindex = 10001

[johnw230873]

If anyone has any ideas it would be great as I still haven't been able to work this out.