cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
164
Views
5
Helpful
2
Replies
Frequent Contributor

SNMPv3 server Community?

What exactly is the Community configuration still needed for if you configure SNMP user? Is it just good if you have a group you want to set RO permissions only for? Wouln't Views be better? 

Can you have Users and Communities?

2 REPLIES 2
Highlighted
VIP Expert

Re: SNMPv3 server Community?

The SNMP can be configured as RO or RW.

Have a look at this document for config example:

https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/7282-12.html

HTH

Highlighted
Frequent Contributor

Re: SNMPv3 server Community?

Great! Lets say you are configuring devices for SNMP to be polled to Solarwinds and there are already existing devices in Solarwinds. Can you configure additional devices using different SNMPv3 parameters such as without using communities (only group, user, view, etc.)? Basically I don't want to remove what exisits in Solarwinds, just want to improve configurations of devices that are already being polled (change username, password, etc.) or fix them if they are not even polling correct.
CreatePlease to create content
Content for Community-Ad