[SOLVED] Having big trouble with Catalyst ME 3400!

[selahattin_cilek]

I have managed to reset to factory defaults a Catalyst ME 3400, but no matter what I did, I could not get it to respond to pinging.

CISCO#show run
Building configuration...

Current configuration : 3562 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname CISCO
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
system mtu routing 1998
ip subnet-zero
ip domain-name ahlat.com.tr
!
!
!
crypto pki trustpoint TP-self-signed-96207744
 enrollment selfsigned
 subject-name cn=IOS-Self-Signed-Certificate-96207744
 revocation-check none
 rsakeypair TP-self-signed-96207744
!
!
crypto pki certificate chain TP-self-signed-96207744
 certificate self-signed 01
[redacted]
  quit
!
!
!
!
spanning-tree mode rapid-pvst
spanning-tree extend system-id
!
!
!
vlan internal allocation policy ascending
vlan dot1q tag native
!
vlan 2
 name VLAN_PCS
!
vlan 3
 name VLAN_WIFI
!
vlan 4
 name VLAN_VOIP
!
vlan 5
 name VLAN_CAMS
!
vlan 6
 name VLAN_A
!
vlan 7
 name VLAN_B
!
vlan 8
 name VLAN_C
!
vlan 9
 name VLAN_D
!
vlan 10
 name VLAN_E
!
vlan 11
 name VLAN_F
!
vlan 12
 name VLAN_G
!
vlan 13
 name VLAN_H
!
ip ssh time-out 60
ip ssh version 2
!
!
interface GigabitEthernet0/1
 switchport mode trunk
!
interface GigabitEthernet0/2
 switchport access vlan 3
 switchport mode trunk
!
interface GigabitEthernet0/3
 switchport mode trunk
!
interface GigabitEthernet0/4
 switchport mode trunk
!
interface GigabitEthernet0/5
 switchport mode trunk
!
interface GigabitEthernet0/6
 switchport mode trunk
!
interface GigabitEthernet0/7
 switchport mode trunk
!
interface GigabitEthernet0/8
 switchport mode trunk
!
interface GigabitEthernet0/9
 switchport mode trunk
!
interface GigabitEthernet0/10
 switchport mode trunk
!
interface GigabitEthernet0/11
 switchport mode trunk
!
interface GigabitEthernet0/12
 switchport mode trunk
!
interface GigabitEthernet0/13
 port-type nni
 switchport mode trunk
!
interface GigabitEthernet0/14
 port-type nni
 switchport mode trunk
!
interface GigabitEthernet0/15
 port-type nni
 switchport mode trunk
!
interface GigabitEthernet0/16
 port-type nni
 switchport mode trunk
!
interface Vlan1
 ip address 192.168.2.8 255.255.255.0
!
ip default-gateway 192.168.2.1
no ip http server
ip http secure-server
ip classless
!
!
!
!
control-plane
!
!
line con 0
 speed 115200
line vty 0 4
 login
line vty 5 15
 login
!
end

What am I missing? Please help.

[Richard Burts]

Thanks for the update. Glad that you were able to update the software and that now things are working. I wish that we have been able to identify the cause of the issue. But at this point I do not think it is possible.