01-13-2015 05:44 PM - edited 03-07-2019 10:12 PM
Hi Experts,
I want to know if how do i configure the SPAN session only for the HTTP traffic?
Regards
far
Solved! Go to Solution.
01-13-2015 07:30 PM
Hi Far,
From a Switch(Catalyst of Nexus) perspective and SPAN configuration perspective, there's no option to filter out HTTP traffic. When you specify the SPAN source, you only have the option to apply a physical interface, port-channel or VLAN.
What you can do is to filter out the HTTP traffic within your monitoring tool(Wireshark for example) using the tool filters.
I hope this helps,
Ivan.
01-13-2015 07:30 PM
Hi Far,
From a Switch(Catalyst of Nexus) perspective and SPAN configuration perspective, there's no option to filter out HTTP traffic. When you specify the SPAN source, you only have the option to apply a physical interface, port-channel or VLAN.
What you can do is to filter out the HTTP traffic within your monitoring tool(Wireshark for example) using the tool filters.
I hope this helps,
Ivan.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide