Hello All,
We have this new vlan created in one of our switches.However when checking the stp state for this vlan , it shows:-
"Spanning tree instance(s) for vlan does not exist"
To note, this vlan is created only on this one switch as of now. There is a single port and few trunk ports that host this new vlan.
On the trunk ports, i can see this vlan is listed under "Vlans Err-disabled on Trunk"
I have shutdown the port for the moment.
vlan101
name KPL_GEM
int eth1/5
description KPL_GEM-host1
shutdown
switchport access vlan 101
spanning-tree port type edge
spanning-tree guard root
sh vlan outputs shows this vlan as being existing in the switch
sh vlan id 101
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
101 KPL_GEM active Po21, Po11, Eth1/5
Appreciate all inputs as to what could be wrong and how to fix this.
