cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
244
Views
0
Helpful
1
Replies
bobbybrowning
Beginner

splitting vlan traffic

i have several cisco sg300's (in L2 mode) and i would like to have certain vlan traffic go through 1 fiber port and other vlan traffic go through the other fiber port.

i'm using vlan 100 for data(untagged) and vlan 200 for voice(tagged)

ports 1-24 have vlan 100 and 200

the fiber port g27 i have set up as vlan100 untagged

and fiber port g28 is using vlan 200tagged

yet no traffic is passing through

any help would be appreciated

1 REPLY 1
Vincenzo Errante
Beginner

you can use

Spanning tree MST

http://www.cisco.com/en/US/tech/tk389/tk621/technologies_white_paper09186a0080094cfc.shtml

where you use double trunk but with different priority for certain vlan

document for SR300

http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/administration_guide/CLI_300_1_2_5.pdf

Regards