12-23-2008 04:28 AM - edited 03-06-2019 03:06 AM
Hi,
Currently i am using c2940-i6k2l2q4-mz[1].121-22.EA10 in which i am not able to enable SSH for remote login, c2940-i6k2l2q4-mz[1].121-22.EA12.bin, but it give an error PERMISSION DENIED.
Please let me know what IOS version will support SSH & from where do i can download that IOS for my 8-100 Mbps & 1 Gigabit (cisco C-2940- 8TT-S
12-23-2008 04:43 AM
That is a correct crypto version to support the ssh function . It must be a config problem . Make sure you have allowed ssh on the vty lines.
basic steps are
ip domain name
crypto key generate rsa
key size 1024
line vty 0 15
transport input SSH
12-23-2008 04:54 AM
Hi,
Its giving me to install Ip domain name, but not giving me to install the Crypto in configuration mode & also in line vty.
I have tried using .E10b.bin & E4a.bin
in E12.bin which i mentioned earlier, when try to boot, it gives me Permission Denied & boot from E10b.bin file.
Thanks..
12-23-2008 05:02 AM
This is the crypto version , if this is what you have on your boxes it should work . The filename has to be exact . I have this same version working with SSH on 2940's .
Crypto version (SSH)
c2940-i6k2l2q4-mz.121-22.EA10a.bin
non crypto version (no SSH)
c2940-i6q4l2-mz.121-22.EA10a.bin
http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a00800949e2.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide