SSHV2

[dvanzee]

Can someone tell me the commands I need to enable SSHV2 on a 3750 switch. I currently have SSHV1 enabled, but for whatever reason can't connection on SSHV2. Thanks!~

[Lucien Avramov]

you need to enable ip ssh version 2

[Reza Sharifi]

Hello,

Here is the command with an example:

This example shows how to configure the switch to run SSH Version 2:

Switch(config)# ip ssh version 2

Also, please refer to Cisco 3750 Command reference guide for more info: 

https://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_25_se/command/reference/cli1.html#wpmkr3011557

HTH

Reza