Stackable 3750 ARP Question

[saurabh1969]

I've a stackable 3750 switches. There are three with one being master and all of them have a same priority. What is the easiest way to find the interface associated with an IP as show arp | incl 192.168.x.x shows the mac address of the master switch interface which connects to other slave switch. If there is a host connected to one of the slave switch, what is the best way to find the port on which that host (192.168.x.x) is connected? I know it is simple.

[alexandr.serebriakov]

sh arp | i IP_ADD

sh mac- | i MAC_FROM_PREVIOUZZZ KOMMAND

Preved...

[saurabh1969]

I've already tried that but that will give you the mac address of the master switch interface

Vlan Mac Address Type Ports

---- ----------- -------- -----

10 0019.06b2.c93f DYNAMIC Po10

4000 0019.06b2.c93f DYNAMIC Po10

15 0019.06b2.c93f DYNAMIC Po10

Total Mac Addresses for this criterion: 3