Stackwise Virtual C9300

[prabhatrahul]

---

⁶Hi,

Did mistake by configuring virtual stackwise in C9300 switch . I know it doesnt support VSS. Now both switch keeps on restarting. 

Error:

waiting for 120 seconds for other switches to boot
#######Jun 4 15:10:59.082: %PMAN-3-PROCHOLDDOWN: F0/0: The process fed has been helddown (rc 134)
#Jun 4 15:10:59.165: %PMAN-0-

And switch boot automatically!!

I did emergency-install with ios from usb and after completing install it still shows same error.

How can i disable stackwise virtual command from switch: mode. 

Please help !!!!

[marce1000]

 -Can  you still get into configuration mode between reboots and or then issue : no stackwise-virtual command ?

 M.

[prabhatrahul]

Hi,

This is the problem. Switch keeps on rebooting and i cannot go to config mode. Only i can go is switch: mode.

[Reza Sharifi]

Try this document to get to rommom mode

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-6/configuration_guide/sys_mgmt/b_166_sys_mgmt_9300_cg/b_166_sys_mgmt_9300_cg_chapter_01100.html#task_nzq_q4z_n1b

HTH

[prabhatrahul · Accepted solution]

HI,

Problem resolved !!! 

Contacted TAC and removed STACK Config from Rommon mode.

Thanks for support !!!

[marce1000]

Tx, but share howto here (too).

M.