Stackwise Virtual for 3850 24XS switches

[dinesh joshi]

Hello Friends,

Is there any updated form Cisco to support Stackwise Virtual on 24 Port switches.

It was supported only on Catalyst 3850-48-XS Series. Not sure if there any update on supporting 24 port switches also. 

[Leo Laohoo · Accepted solution]

Stackwise Virtual will only be supported on 48-port SFP/SFP+ models.

[dinesh joshi]

I was seeing in community someone tried on 12 port switches and it was working. Not finding any document where cisco mention it support for other switches as well.

[paolo.brondolo]

Hi , Do You have any news about stackwise virtual on WS-C3850-12XS, I didn't found any document.

LInk is Up but there  isn't  no Neighbors

Switch  SVL     Ports                           Link-Status     Protocol-Status
------  ---     -----                           -----------     ---------------
2       1       TenGigabitEthernet2/0/6          U               T              
                  TenGigabitEthernet2/0/12        U               T      

Stackwise Virtual Link(SVL) Neighbors Information:
--------------------------------------------------
Switch  SVL     Local Port                  Remote Port
------  ---     ----------                  -----------
2       1       TenGigabitEthernet2/0/6   
                TenGigabitEthernet2/0/12         

Switch#sh int status | i connected
Te2/0/6      st_wise Link                       connected    4094         full    10G SFP-10GBase-LR
Te2/0/11    Dual-Active  Link                connected    1            full   1000 1000BaseLX SFP
Te2/0/12    st_wise Link                       connected    4094         full    10G SFP-10GBase-LR