05-21-2018 01:41 AM - edited 03-08-2019 03:04 PM
Hi All
I have a question about Stackwise virtual, when setting up the switch virtual link on each switch, do you have to use a different number like when you set up vss, or is the switch virtual link the same number on both ends of the link?
02-14-2020 03:20 PM
Hi Carl,
Depending on the HW used, there is a set of ports that can be used as a Stackwise Virtual link. The port numbering does not need to match between switches.
02-14-2020 03:42 PM
Hi,
No, this is not like VSS that you need 2 different Portchannels with 2 different numbers. You just configure the physical ports and add them to the domain on both switches.
interface te1/0/1
stackwise-virtual link 1
interface te1/0/2
stackwise-virtual link 1
same thing on switch 2
interface te2/0/1
stackwise-virtual link 1
interface te2/0/2
stackwise-virtual link 1
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide