Static Multicast on C9300

[GrimSay]

Hi,

I'm trying add a static multicast binding to an interface on a 9300 series switch.

ie, I need to force some multicast groups out an interface which does not have IGMP group requests comming in via it.  The catalyst guide below says to use the "Device(config)# multicast ip-address 224.1.1.100 vlan 10" formatted style command, however the "multicast" command is not available on the 9300 series. 

Any help much appreciated.

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst_pon/software/configuration_guide/mcast/b-gpon-config-multicast/configuring_static_multicast_tables.pdf

[balaji.bandi]

what is the version of code running on Cat 9K

enable Multicast first before configuring example :

config t

!

ip multicast-routing

!

end

then try other commands

[GrimSay]

Hi BB,

its running 17.06.04 CAT9K_IOSXE.

"ip mulitcast-routing" is enabled.

Any other ideas?