08-11-2011 12:54 PM - edited 03-07-2019 01:40 AM
We have two 3750 core switches which will have six 2960 edge switches connecting it. We have three vlans:
vlan 1 - 10.1.1.1 255.255.254.0
vlan 2 192.168.2.0 255.255.255.0
vlan 3 192.168.3.0 255.255.255.0
My servers are using 10.1.1.x
My workstations are using 10.1.0.x
I am just wondering if i should use 10.1.1.1 255.255.255.0 for vlan 1 instead of the above?
Any help will be greatly appreciated?
Thanks,
Lake
Solved! Go to Solution.
08-12-2011 11:59 AM
All done.
Thank you very much
Regards,
Lake
08-12-2011 12:06 PM
Lake
Glad you got it sorted and thanks for rating posts in this thread and others you have posted.
It is much appreciated.
Jon
08-12-2011 12:39 PM
Thank you Jon.
You and the other guys were of tremendous help and you guys cleared up a lot of things for me. Again, i truly appreciate all the help i have received. I just cannot say enough of you guys.
Regards,
Lake
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide