SUP 2T temperature

adamgibs7 · ‎05-11-2015

Dears

I get the below from the show environment output I want to proof that the below output temperature is normal for the asic can anybody route me to the proper document for proof.

switch 1 module 5:

switch 1 module 5 power-output-fail: OK

switch 1 module 5 outlet temperature: 35C

switch 1 module 5 inlet temperature: 26C

switch 1 module 5 device-1 temperature: 30C

switch 1 module 5 device-2 temperature: 33C

switch 1 module 5 asic-1 temperature: 55C

switch 1 module 5 asic-2 temperature: 46C

switch 1 module 5 asic-3 temperature: 35C

switch 1 module 5 asic-4 temperature: 59C

switch 1 module 5 asic-5 temperature: 45C

switch 1 module 5 asic-7 temperature: 45C

switch 1 module 5 asic-8 temperature: 60C

switch 1 module 5 RP outlet temperature: 31C

switch 1 module 5 RP inlet temperature: 27C

switch 1 module 5 RP device-1 temperature: 42C

switch 1 module 5 EARL outlet temperature: 31C

switch 1 module 5 EARL inlet temperature: 26C

switch 1 module 5 EARL device-1 temperature: 0C

switch 1 module 5 EARL device-2 temperature: 0C

- See more at: https://supportforums.cisco.com/discussion/12504416/sup-2t-temperature#sthash.GH80y1Se.dpuf

Mark Malone · ‎05-12-2015

whats that specific module 5 , the SUP2T temps below 0-40c is the normal operation temps

i have 5 6500s here all with dual sup2t all running over that as standard , only if there hitting and staying at above 70 you should be fine

http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/catalyst-6500-series-supervisor-engine-2t/data_sheet_c78-648214.html

Example

switch-core4#SH ENv TEM | I asic
module 5 asic-1 temperature: 55C
module 5 asic-2 temperature: 35C
module 5 asic-4 temperature: 52C
module 5 asic-5 temperature: 46C
module 5 asic-7 temperature: 46C
module 5 asic-8 temperature: 60C
module 6 asic-1 temperature: 54C
module 6 asic-2 temperature: 35C
module 6 asic-4 temperature: 52C
module 6 asic-5 temperature: 46C
module 6 asic-7 temperature: 46C
module 6 asic-8 temperature: 57C